![]() Especially if you are upgrading from a hard drive.Īgain, here is the PCI adapter that I used: Upgrading the Dell Optiplex 7010 with PCI NVMe Solid State drive is a brilliant value upgrade, and completely transforms the machine. Now you can install an operating system of your choice or clone one of your existing drives to your new NVMe drive and enjoy a decent performance increase. This makes it marginally faster, but I doubt you would notice much difference. Untick all the SATA ports which do not have drives connected.įinally, if you want the maximum possible speed from your new drive, consider disabling C-States in the BIOS. You can fix this by going into the BIOS Setup and then System Configuration -> Drives. If you do not have any SATA drives connected you will receive a warning on start-up that says: Now that you have written the new BIOS, restart the machine. If possible use the Blue X16 PCI slot, it is much faster than smaller black one. If you have not yet installed your SSD into the machine, you can do it now. ![]() The BIOS modification is complete! Install the PCI NVMe SSD Shut down the machine and remove the jumper from the service pins and move it back to the password reset pins if you took it from there. Go back to your command prompt and run the command: Now go to File -> Save Image File and save the file in the same location as the flash tool as NVME.bin. Once those are out of the way, you can find it just above, and to the right of the RAM slots. If you are upgrading a Small Form Factor machine, the service jumper is in an awkward position which will require you to remove the Optical Drive and Hard Drive cage to access it.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |